inspections

Certified Spindle Preparation offers precise wear inspections.  Certified taper-check gages conforming to the National Bureau of Standards are used for these inspections. 

          Our inspection includes the following:

  • Test Bar T.I.R. at 12" Length
  • Blued Taper Percentage Contact
  • Draw Bar Retention Pressure (pounds of pull)
  • Axial Bearing Deflection Test (to insure bearings haven't lost their pre-load)

Certified Spindle Preparation's services will take the place of costly spindle overhaul two out of three times.  However it will not completely eliminate the need to rebuild your spindles.  Our evaluation of your spindles can determine if an overhaul is required.

Call to schedule your inspection today!

 

Home What Is It? Do I Need It? Is It Worth It? Inspections FAQ's Tips Locations           Contact Us

Copyright 2016 Certified Spindle Preparation, Inc.  All rights reserved.  This material may not be duplicated for any profit-driven enterprise.
Disclaimer:  We make no warranties as to the results to be obtained from the use of this information.  Always defer to the wisdom of the machine manufacturer who understands exactly what has been engineered into their system.

My favorite is fake watches the Louis Tank, rounded replica watches uk angle, soft lines and vertical lugs to replica watches elegant and yet capable, refined and yet the rolex replica atmosphere.